1. K-State home
  2. »University Operations
  3. »Environmental Health and Safety
  4. »Environmental
  5. »Olathe Campus Hazardous Waste Generator Status and Management Requirements

Environmental Health and Safety

Olathe Campus Hazardous Waste Generator Status and Management Requirements

The Kansas State University Olathe Campus is classified as a Conditionally Exempt Small Quantity Generator (CESQG)

To be classified as a CESQG, the campus must meet the following criteria:

  • Generate less than 25 kilograms (55 pounds) of hazardous waste in a single calendar month.
  • Generate and accumulate less than 1 kilogram (2.2 pounds) in a single calendar month of acutely hazardous waste (P-list) or 100 kilograms (220 pounds) of any residue or contaminated soil, waste, or other debris resulting from the cleanup of a spill, into or on any land or water, of any acute hazardous wastes listed in 40 CFR 261.31 (F list) or 261.33(e) (P-list). 

General Requirements

  • Make a hazardous waste determination for each hazardous waste stream generated.  Use the Hazardous Waste Determination Form(.doc).  
    • If analytical testing is needed contact EHS.
    • Use one Hazardous Waste Determination form per waste stream, not one form for each chemical in the waste stream. 

 One person must collect the Laboratory Logs and combine that information into the Campus Monthly Hazardous Waste Generation Log(.xls). Calculate the monthly total for the campus and ensure adherence to the following statements:

  • Never exceed 1,000 kilograms (2,200 pounds) of hazardous waste on-site.  If that amount is exceeded the campus will be subject to Large Quantity Generator (LQG) standards.
  • Never generate or accumulate 1 kilogram (2.2 pounds) or more of acutely hazardous waste onsite. If that amount is exceeded the campus will be subject to LQG standards.
  • Contact EHS immediately if any of the totals are exceeded.

Container Management Requirements

  • Conduct monthly inspections of hazardous waste storage areas.  Use the Hazardous Waste Monthly Inspection form(.doc).
  • The inspections should be documented in a log and should include:
    • the date
    • time of the inspection
    • name of the inspector
    • notation of the observations made
    • date and nature of any repairs or other remedial actions. 
  • Each container must be in good condition.
  • Clearly label or mark each container with the words “Hazardous Waste”.
  • Clearly mark the Start Date on the label and ensure that the date is visible for inspection on each container.  The Start Date is the day waste is first put into the container.
  • Clearly mark the Full Date on the label and ensure that the date is visible for inspection on each container.  The Full Date is the day the waste is full or is no longer being used.
  • Each container must be compatible with its contents.
  • Each container must be kept closed except when adding or removing waste.
  • Hazardous wastes must not be stored near other hazardous wastes or materials with which it is incompatible. 

Training Requirements

  • Hazardous Waste Training - annually, provided by EHS in person or online. 

Record Keeping Requirements 

Maintain completed Logs and Forms for a minimum of 5 years:

  1. Hazardous Waste Determination Form
  2. Laboratory Monthly Hazardous Waste Generation Log
  3. Campus Monthly Hazardous Waste Generation Log
  4. Hazardous Waste Monthly Inspection Form

Hazardous Waste Disposal

Notify the Manhattan campus Environmental Health and Safety office that a hazardous waste shipment is needed. 

  • P-listed waste must be shipped prior to reaching the 1 kg limit.
  • For all other waste, EHS recommends a shipment be made prior to reaching 1,500 pounds.

EHS will make arrangements with the hazardous waste contractor to pick up the waste.  Contact the Environmental Manager, Environmental Compliance Specialist or Hazardous Waste Technician listed on the EHS website at https://www.k-state.edu/safety/about/staff.html.  You can also contact the EHS office at 785-532-5856 or safety@ksu.edu.