Research Foundation
Kansas State University
2005 Research Park Circle
Suite 105
Manhattan, KS 66502-5020
Tel: 785-532-5720
Fax: 785-532-3920
tech.transfer@k-state.edu

Engineering & Manufacturing

Kansas State University's Advanced Manufacturing Institute, Manufacturing Learning Center, and Engineering College reflect the University's commitment to advanced engineering research and the development of technological products and processes. The technologies in this area are devices and techniques that are useful as components of engineering or production/manufacturing systems. Instrumentation and measurement devices are also included.

To view a brief description or request further information about a specific technology, click on its title below.

• High-Resolution Direct-Write Multiphoton Photolithography in Electronic Polymers (07-21)

• A Nondestructive Method to Detect Whether a Certain Type of Material is Present Inside an Object from a Standoff Distance (07-17)

• Non-Streaming Perforated Semi-Conductor Neutron Detector and Dosimeter and Method of Making the Same (06-17)

• Ultraviolet and Deep Ultraviolet Light Emitters with Unconventional Layer Design (05-19)

• Nanotubes, Syntheses, and Application (05-17)

• Multiple-Access Code Generation (05-02)

• Activation of Subtilisin Carlsberg in the Hexane by Lyophilization in the Presence of Fumed Silica (04-11)

• Micro-Pocket and Micro-Capillary Gas Filled Neutron Detectors (04-07)

• Producing 4 mJ, 25 fs Pulses From a kHz Laser Using a Single Stage Multipass Amplifier (03-09)

• Method and Apparatus for Use of III-Nitride Wide Bandgap Semiconductors in Optical Communications (02-31)

• Nitride Microlens Arrays for Blue and UV Wavelength Applications (02-24)

• Holographic Particle Image Velocimetry Apparatus and Method (99-07 & 98-21)