1. K-State home
  2. »DCM
  3. »K-State News
  4. »News
  5. »Kansas State University Bulk Solids Innovation Center welcomes experts from DuPont, Dow Chemical as part of inaugural short course

K-State News

K-State News
Kansas State University
128 Dole Hall
1525 Mid-Campus Dr North
Manhattan, KS 66506

785-532-2535
785-532-7355 fax
media@k-state.edu

Kansas State University Bulk Solids Innovation Center welcomes experts from DuPont, Dow Chemical as part of inaugural short course

Wednesday, Feb. 10, 2016

short course

The Kansas State University Bulk Solids Innovation Center hosted more than 30 students from 12 different states during its inaugural short course Jan. 26-29, which covered the fundamentals of bulk solids processing and handling. | Download this photo.

 

SALINA — The Kansas State University Bulk Solids Innovation Center is introducing new educational offerings for professional development and conducted its first short course Jan. 26-29, covering the fundamentals of bulk solids processing and handling.

With registration at capacity, the inaugural session hosted participants from 12 different states representing such companies as Nutrilite, Nestle, Styrolution, Green Dot and Kice Industries. The course was designed to give both new and existing employees within the particle technology field comprehensive knowledge pertaining to handling, processing, storage and flow behavior.

"Education on the science and safety of bulk solids is imperative because almost every industry has properties of particle technology," said John Lawrence, the facility's research director. "And after the excellent response we had to our first course, it's evident that there is a strong demand among manufacturers to gain a better understanding of bulk solids. We are excited to be able to provide more of these learning opportunities in the near future."

A variety of renowned experts in the field — such as Timothy Bell, an engineering fellow with DuPont; Karl Jacob, an engineering fellow from the Dow Chemical Co.; and Ben D'Alessio, director of dense phase systems at Coperion K-Tron — were brought in to lead classroom discussions and hands-on demonstrations in the center's full-scale test laboratory. Along with an overview of pneumatic conveying, the three-and-a-half-day course also further examined challenges within the hopper. Participants were exposed to powder and solid flow problems and were shown how to prevent and mitigate a dust explosion. They also explored programmable logic controller, or PLC, technology.

The Kansas State University Bulk Solids Innovation Center plans to offer this foundational course every six months, while courses focused on more specific topics will be given throughout the year. The center's next class, March 8-10, will specialize in pneumatic conveying of powders and bulk solids. Registration information can be found online at bulk-solids.k-state.edu/profdev/.

The 13,000-square-foot facility – officially opened in May 2015 – was created to promote bulk solids materials handling within undergraduate education, professional development and industry research. Two local companies, Coperion K-Tron Salina and Vortex Valves, serve as anchor occupants in the building. The vast amenities and offerings of the Kansas State University Bulk Solids Innovation Center make it the only one of its kind in North America.

For information regarding upcoming short courses, or inquiries about the center and its capabilities, contact Lawrence at jlawren@k-state.edu or 785-829-1110.



Source

John Lawrence
785-829-1110
jlawren@k-state.edu

Website

Kansas State University Bulk Solids Innovation Center

News tip

Salina

Written by

Julee Cobb
785-826-2642
julee@k-state.edu

At a glance

The first short course offered by Kansas State University's Bulk Innovation Center in Salina was a success, attracting participants from such companies as DuPont, Dow Chemical, Nestle and more.