Start-Up for AK120

1. Podium-needed for any activity
   • Unlock cabinet
   • Power-Power should remain on at all times. If power is off, the power switch is located at the bottom of the podium in the center
2. Using the Room Lighting-get better visibility of display
• On/Off switches control small sections from front to back, larger numbers are more toward back of room
3. Using the microphones
   • Wireless mic (found in podium) turn on switch
4. Using the Projector
   • Lower front room lights to view projector bulb
   • Press "Display Power" button on Media Link control on podium
   • Press "PC" button for PC, "Document Camera" for Elmo, or "Laptop" for laptop
   • Press "VCR" for VCR/DVD player
5. Using/Projecting the Computer
   • PC should be on. If monitor is black, move mouse
   • Press "PC" to project
6. Using the (VP) Visual Presenter (EPSON) to show hard copy
   • Turn on VP, lights will be visible on panel when on
   • Raise camera arm and lights
   • Turn on desired lamps
   • Press "Document Camera" button on Media Link controller

Shut-Down for AK120

End of class-prepare for next person-needed if equipment was used

1. If used wireless microphone
• Turn On/Off switch to Off
2. If used VP
   • Turn off VP
   • Lower lights & camera arm
3. Computer Shut-Down
   • Replace wireless mouse in cradle/charger
   • PC-On bottom menu bar-Select: Start-->Shut Down-->Restart the Computer-->Yes
4. Turn off Projector Press "Display Power" button on Media Link and hold for 2 seconds
5. Put Away All Remotes
6. Podium
   • Lock up
7. Lighting turn off lights if no class following
8. Hotline-Get Help-Phone on bottom right shelf
   • Dial 2-5798